Настраиваю CUBE redundancy на 2921. IOS - 15.7(3)M4a
Влючаю CUBE
Код:
voice service voip
mode border-element
allow-connections sip to sip
Включаю redundancy
Код:
voice service voip
redundancy
Настраиваю HSRP, tracking и схему
Код:
State is Active
2 state changes, last state change 01:31:29
Virtual IP address is 178.238.116.52
Active virtual MAC address is 0000.0c9f.f000
Local virtual MAC address is 0000.0c9f.f000 (v2 default)
Hello time 3 sec, hold time 10 sec
Next hello sent in 1.312 secs
Preemption enabled
Active router is local
Standby router is 178.238.116.54, priority 50 (expires in 9.760 sec)
Priority 50 (configured 50)
Track object 2 state Up decrement 10
Group name is "SB" (cfgd)
GigabitEthernet0/1 - Group 6 (version 2)
State is Active
2 state changes, last state change 01:31:30
Virtual IP address is 172.17.16.14
Active virtual MAC address is 0000.0c9f.f006
Local virtual MAC address is 0000.0c9f.f006 (v2 default)
Hello time 3 sec, hold time 10 sec
Next hello sent in 2.704 secs
Preemption disabled
Active router is local
Standby router is 172.17.16.16, priority 50 (expires in 10.224 sec)
Priority 50 (configured 50)
Track object 1 state Up decrement 10
Group name is "hsrp-Gi0/1-6" (default)
Включаю redundancy на CUBE
Код:
redundancy inter-device
scheme standby SB
Пытаюсь настроить интеркоммуникацию HSRP
Код:
ipc zone default
association 1
no shutdown
protocol sctp
local-port 5000
local-ip 172.17.16.15
и при попытке ввода локального IP получаю ошибку -
Код:
%Error: Unable to validate local address 172.17.16.15
Хотя все делаю по инструкции:
https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/112095-cube-hsrp-config-00.html#anc8Что я делаю не так?