Имеем:
CUCM 12.5 -- CUBE (на основе 2921) -- PROV
От провайдера есть инфо - использовать DTMF: RFC2833, INBAND, SIPINFO
На CUCM установлено - OOB and RFC2833
На CUBE 2 диалпира исходящий и входящий к провайдеру:
Код:
dial-peer voice 1 voip
description to-PROV-OUT
translation-profile outgoing FCCPS-OUT
destination-pattern 8T
session protocol sipv2
session target ipv4:31.44.92.196
session transport udp
voice-class sip bind control source-interface GigabitEthernet0/0
voice-class sip bind media source-interface GigabitEthernet0/0
dtmf-relay rtp-nte
codec g711alaw
no vad
Код:
dial-peer voice 100 voip
description from-SIP-prov
translation-profile incoming FCCPS1
session protocol sipv2
session transport udp
incoming called-number 7495280....
dtmf-relay rtp-nte
codec g711alaw
no vad
Диапиры к CUCM
Код:
dial-peer voice 200 voip
description to-from-CUCM-PUB
preference 1
destination-pattern [5-7]...
session protocol sipv2
session target ipv4:172.17.16.10
voice-class sip bind control source-interface GigabitEthernet0/1
voice-class sip bind media source-interface GigabitEthernet0/1
dtmf-relay rtp-nte
codec g711alaw
no vad
В чем я могу ошибаться, почему оно не работает )?