Есть два идентичных стека:
Код:
stack1# sh ver | i C2960S-UNIVERSALK9-M
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)EX4, RELEASE SOFTWARE (fc1)
1 52 WS-C2960S-48FPS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
2 52 WS-C2960S-48FPS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
* 3 52 WS-C2960S-48TS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
4 52 WS-C2960S-48TS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
Код:
stack2# sh ver | i C2960S-UNIVERSALK9-M
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)EX4, RELEASE SOFTWARE (fc1)
1 52 WS-C2960S-48TS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
2 52 WS-C2960S-48TS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
3 52 WS-C2960S-48FPS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
* 4 52 WS-C2960S-48FPS-L 15.0(2)EX4 C2960S-UNIVERSALK9-M
На одном мне по SNMP отдаются стек-порты и их состояния:
Код:
# snmpwalk -v 2c -c xxxx 10.1.17.3 .1.3.6.1.2.1.2.2.1.2 | grep StackPort
iso.3.6.1.2.1.2.2.1.2.5179 = STRING: "StackPort1"
iso.3.6.1.2.1.2.2.1.2.5182 = STRING: "StackPort2"
iso.3.6.1.2.1.2.2.1.2.5185 = STRING: "StackPort3"
iso.3.6.1.2.1.2.2.1.2.5188 = STRING: "StackPort4"
А на другом нет:
Код:
# snmpwalk -v 2c -c xxxx 10.1.17.2 .1.3.6.1.2.1.2.2.1.2 | grep StackPort
Остальные типы портов показываются без проблем, нет только стековых.
Что за петрушка, есть идеи?
