Все ок загружается, прописываю нужные мне настройки, копирую конфиг, делаю reload, и опять rommon
Building configuration...
[OK]
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#reload
Proceed with reload? [confirm]
01:07:37: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Comm and.
01:07:40: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
01:07:40: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
01:07:40: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con sole debugging output.
01:07:43: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
***
*** --- SHUTDOWN NOW ---
***
01:07:43: %SYS-SP-5-RELOAD: Reload requested
01:07:43: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
01:07:43: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con sole debugging output.
Resetting .......
System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupportCopyright (c) 2004 by cisco Systems, Inc.
Cat6k-Sup32 platform with 262144 Kbytes of main memory
rommon 1 >
Как быть как восстановить. Перед этим сбросил пароль, такой темой - rommon 1 >confreg 0x2142
You must reset or power cycle for new config to take effect
rommon 2 >reset
Потом возвращаю router(config)#config-register 0x2102 все равно rammon.