Добрый день, прошу помочь с ситуацией:
как новое шасси 2851
и новая плата nme-xd-48es-2sp (48 портовый РОЕ модуль с 2мя SFP, без каких-либо индикаторов)
предполагаю что в саму плату нужно залить ios или его производную. Как это сделать - пока не знаю, буду благодарен за подсказки и рекомендации
Router#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3)
Technical Support:
http://www.cisco.com/techsupportCopyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 19-Jun-09 15:13 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)
Router uptime is 21 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-advipservicesk9-mz.124-24.T1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.htmlIf you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2851 (revision 53.50) with 512000K/12288K bytes of memory.
Processor board ID
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
191K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
Router#show inv
NAME: "2851 chassis", DESCR: "2851 chassis"
PID: CISCO2851 , VID: V08 , SN:
NAME: "Unknown on Slot 1", DESCR: "Unknown"
PID: , VID: , SN:
Router#sh diag
Slot 0:
C2851 Motherboard with 2GE and integrated VPN Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:18:42 ago
Onboard VPN : FW ver01100200
EEPROM contents at hardware discovery:
PCB Serial Number :
Hardware Revision : 1.0
Top Assy. Part Number : 800-26922-07
Board Revision : A0
Deviation Number : 0
Fab Version : 03
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 87
Hardware date code : 20100829
Chassis Serial Number :
Chassis MAC Address : e804.623e.ac80
MAC Address block size : 32
CLEI Code : COMHU00ARB
Product (FRU) Number : CISCO2851
Part Number : 73-8480-07
Version Identifier : V08
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 34 33 35 33 4A 4A 35 40
0x10: 03 E9 41 01 00 C0 46 03 20 00 69 2A 07 42 41 30
0x20: 88 00 00 00 00 02 03 03 00 81 00 00 00 00 04 00
0x30: 09 87 83 01 32 B6 DD C2 8B 46 43 5A 31 34 33 39
0x40: 37 32 48 50 C3 06 E8 04 62 3E AC 80 43 00 20 C6
0x50: 8A 43 4F 4D 48 55 30 30 41 52 42 CB 8F 43 49 53
0x60: 43 4F 32 38 35 31 20 20 20 20 20 20 82 49 21 20
0x70: 07 89 56 30 38 20 D9 03 40 C1 C2 FF FF FF FF FF
Slot 1:
Unknown (type 65535) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
EEPROM format version 255
EEPROM contents (hex):
0x00: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x10: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
